



Faxon Firearms Match Series Drop-In Barrel – Glock 19, 9mm, Fluted, Black Nitride
$120.00 Original price was: $120.00.$111.00Current price is: $111.00.
Faxon’s Match Series barrel for the Glock 19, machined from stress-relieved 416-R stainless with a fluted profile and salt bath nitride inside and out. Conventional 1:10 button rifling behind an 11-degree crown, fitting Gen 1 through Gen 5 including the 19X and G45.
- Description
- Additional information
- Reviews (0)
- FAQ
Faxon Firearms Match Series Drop-In Barrel – Glock 19, 9mm, Fluted, Black Nitride Features
Faxon’s Match Series sits a step above their Duty line, and the differences are in the steel and the finish work: 416-R stainless rather than 4150 CMV, with a fluted exterior. The rifling is unchanged — conventional, button cut at 1:10, behind an 11-degree target crown, with salt bath nitride inside and out.
It drops into any factory-spec slide, our Gen 3 G19 skeletonized slide included, and the rest are listed under handgun barrels.
Specifications
- Platform: drop-in replacement barrel, fits Glock 19 Gen 1 through Gen 5, plus the 19X and G45
- Caliber: 9mm
- Material: 416-R stainless steel, fully stress relieved
- Profile: fluted
- Rifling: conventional lands and grooves, button rifled
- Twist rate: 1:10
- Crown: 11 degree target crown
- Finish: salt bath nitride, bore and exterior
- Muzzle: unthreaded
- Fitment: drops into factory-spec slides, no gunsmithing required
- SKU: FXGB910N19LGQ-N
What’s Included
- 1x Faxon Firearms Match Series drop-in barrel, Glock 19, 9mm, fluted black nitride
Faxon Firearms is an independent manufacturer. This barrel is not made, authorized, endorsed or warranted by GLOCK, Inc. GLOCK is a registered trademark of GLOCK, Inc., referenced here only to describe fitment.
| Weight | 1 lbs |
|---|---|
| Brand | |
| Color | |
| Platform |
Only logged in customers who have purchased this product may leave a review.
How does the Match Series differ from Faxon’s Duty Series?
Steel and finish work, mainly. Match uses 416-R stainless where Duty uses 4150 CMV, and the Match barrel is fluted. Rifling type, twist rate and crown are the same on both. The Match also covers a wider generation range, taking in Gen 5, the 19X and the G45.
What does the fluting actually do?
It removes material from the outside of the barrel, which sheds a little weight and adds surface area for cooling. On a pistol barrel the practical effect is modest — it is as much about how it looks through the ejection port as anything you could measure on a timer.
Is 416-R genuinely better than 4150 CMV?
Different, and picked for different reasons. 416-R is a stainless grade favoured for match barrels because it machines to very fine tolerances. 4150 CMV is a chrome-moly steel valued for toughness and heat resistance. A pistol barrel sees little thermal stress either way, so the practical gap is small.
Will it fit a Gen 5, a 19X or a G45?
Yes to all three, which is worth noting because plenty of G19 barrels stop at Gen 4 — Gen 5 changed the barrel geometry and often needs its own part. Faxon lists this one for Gen 1 through Gen 5 along with both the 19X and the G45.
Is it threaded?
No. Faxon lists the muzzle thread as not applicable on this part number, so it is a plain crowned muzzle. If you want threads for a compensator or a suppressor, that is a different Match Series barrel with its own part number.
Does “match” mean it needs hand fitting?
No, despite what the name suggests. It is still a drop-in barrel for factory-spec slides with no gunsmithing required. The match designation refers to the material and the tolerances held during machining, not to a fitted installation.




Reviews
There are no reviews yet.